TR / TN Series Twin Rod Cylinder

Product Features
Specifications
Stroke Specifications
Ordering Code

Product Features

TR Series (High Precision)

JIS Standard: Implements JIS standards for high-level guidance.
High Precision: Non-rotating accuracy is high with minimal rod deflection.
Long Guide: Uses extended sliding bearings; no additional lubrication required.
Flexible Mounting: Mounting holes on three sides for versatile installation.
Dual Ports: Inlet/outlet ports on both sides for flexible piping.

TN Series (Compact / Adjustable)

Enterprise Standard: Implements reliable enterprise production standards.
Space-Saving: Compact body fixed installation saves valuable setup space.
Lateral Load: High anti-bending and anti-torsion capabilities for lateral loads.
Stroke Adjustment: Front bumper allows adjustment (-5 ~ 0 mm) to mitigate impact.
Magnet: Standard configuration includes a built-in magnet.

Specifications

1. TR Series Specifications

Bore Size (mm)	6	16	25
Action Type	Double Acting
Fluid	Air (Filtered 40μm)
Pressure	0.15 ~ 1.0 MPa (22 ~ 145 psi)
Temp	-20 ~ 70°C
Non-rotating	± 0.2°	± 0.15°	± 0.1°
Port Size	M5 x 0.8		PT 1/8

2. TN Series Specifications

Bore Size (mm)	10	16	32
Pressure	0.15 ~ 1.0 MPa
Stroke Adj.	-5 ~ 0 mm
Non-rotating	± 0.4°	± 0.3°
Port Size	M5 x 0.8		PT 1/8

Stroke Specifications

Model	Bore (mm)	Standard Strokes (mm)	Max Stroke
TR	6	10, 20, 30, 40, 50	50
TR/TN	10	10, 20, 30, 40, 50, 60, 70, 80, 90, 100	100
TR/TN	16~32	10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200	200

Note: Non-standard strokes within the 100mm range are produced at 5mm intervals.

Product Ordering Code

No.	Item	Code	Description
1	Model	TR / TN	Twin Rod Cylinder
2	Bore Size	6 ~ 32	6, 10, 16, 20, 25, 32
3	Stroke	-	Refer to Stroke Table
4	Magnet	S	With Magnet (Standard)
5	Thread	Blank / G / T	PT / G / NPT

Show previous products

View options

Airtac TR series: double-shaft cylinder - TR20X70S

Specification: double shaft cylinder (compound type) Bore: 20mm Stroke: 70mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$130.50

View options
View options

Airtac TR series: double-shaft cylinder - TR16X175S

Specification: double shaft cylinder (compound type) Cylinder diameter: 16mm Stroke: 175mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$173.94

View options
View options

Airtac TR series: double-shaft cylinder - TR25X30S

Specification: double shaft cylinder (compound type) Bore: 25mm Travel: 30mm Magnet: with magnet Tooth type: PT tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$121.30

View options
View options

Airtac TR series: double-shaft cylinder - TR25X60SG

Specification: double shaft cylinder (compound type) Bore: 25mm Stroke: 60mm Magnet: with magnet Tooth type: G tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$143.37

View options
View options

Airtac TR series: double-shaft cylinder - TR20X30S

Specification: double shaft cylinder (compound type) Bore: 20mm Travel: 30mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$106.16

View options
View options

Airtac TR series: double-shaft cylinder - TR25X175S

Specification: double shaft cylinder (compound type) Bore: 25mm Stroke: 175mm Magnet: with magnet Tooth type: PT tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$245.01

View options
View options

Airtac TR series: double-shaft cylinder - TR6X30S

Specification: double shaft cylinder (compound type) Bore: 6mm Travel: 30mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$70.76

View options
View options

Airtac TN series: double-shaft cylinder - TN32X125S

Specification: double shaft cylinder (compound type) Bore: 32mm Stroke: 125mm Magnet: with magnet Tooth type: PT tooth Click to download Airtac product catalog Product Features 1. Implementation of corporate standards. 2. Embedded body installation fixed form, saving installation space. 3. Has a certain anti-bending and anti-torsion performance, can withstand a certain side load. 4. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position loading. 5. The body front anti-collision pad can adjust the cylinder stroke and relieve the impact. 6. This series of cylinder standard configuration for magnetic type, all without magnetic type optional.

Read more less

$276.43

View options
View options

Airtac TR series: double-shaft cylinder - TR20X90S

Specification: double shaft cylinder (compound type) Bore: 20mm Stroke: 90mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$142.34

View options
View options

Airtac TR series: double-shaft cylinder - TR20X175S

Specification: double shaft cylinder (compound type) Bore: 20mm Stroke: 175mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$201.89

View options
View options

Airtac TR series: double-shaft cylinder - TR16X40S

Specification: double shaft cylinder (compound type) Cylinder diameter: 16mm Stroke: 40mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$90.20

View options
View options

Airtac TR series: double-shaft cylinder - TR25X20SG

Specification: double shaft cylinder (compound type) Bore: 25mm Stroke: 20mm Magnet: with magnet Tooth type: G tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$114.46

View options
View options

Airtac TR series: double-shaft cylinder - TR25X90S

Specification: double shaft cylinder (compound type) Bore: 25mm Stroke: 90mm Magnet: with magnet Tooth type: PT tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$166.94

View options
View options

Airtac TR series: double-shaft cylinder - TR25X30SG

Specification: double shaft cylinder (compound type) Bore: 25mm Travel: 30mm Magnet: with magnet Tooth type: G tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$121.30

View options
View options

Airtac TR series: double-shaft cylinder - TR16X80S

Specification: double shaft cylinder (compound type) Cylinder diameter: 16mm Stroke: 80mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$113.72

View options
View options

Airtac TR series: double-shaft cylinder - TR25X100S

Specification: double shaft cylinder (compound type) Bore: 25mm Stroke: 100mm Magnet: with magnet Tooth type: PT tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$174.31

View options
View options

Airtac TR series: double-shaft cylinder - TR10X50S

Specification: double shaft cylinder (compound type) Bore: 10mm Travel: 50mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$84.61

View options
View options

Airtac TR series: double-shaft cylinder - TR20X200S

Specification: double shaft cylinder (compound type) Bore: 20mm Stroke: 200mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$224.32

View options
View options

Airtac TR series: double-shaft cylinder - TR25X60S

Specification: double shaft cylinder (compound type) Bore: 25mm Stroke: 60mm Magnet: with magnet Tooth type: PT tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$143.37

View options
View options

Airtac TR series: double-shaft cylinder - TR20X80S

Specification: double shaft cylinder (compound type) Bore: 20mm Stroke: 80mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$136.88

View options
View options

Airtac TR series: double-shaft cylinder - TR10X70S

Specification: double shaft cylinder (compound type) Bore: 10mm Stroke: 70mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$96.16

View options
View options

Airtac TR series: double-shaft cylinder - TR25X20S

Specification: double shaft cylinder (compound type) Bore: 25mm Stroke: 20mm Magnet: with magnet Tooth type: PT tooth Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$114.46

View options
View options

Airtac TR series: double-shaft cylinder - TR16X60S

Specification: double shaft cylinder (compound type) Cylinder diameter: 16mm Stroke: 60mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$100.55

View options
View options

Airtac TR series: double-shaft cylinder - TR16X70S

Specification: double shaft cylinder (compound type) Cylinder diameter: 16mm Stroke: 70mm Magnet: with magnet Tooth type: M5X0.8 Click to download Airtac product catalog Product Features 1. The implementation of JIS standard, high non-rotation accuracy, piston rod end deflection is small, suitable for accurate guidance. 2. The use of extended sliding support guide, no need to add lubricant, good guide performance. 3. There are mounting holes on three sides of the fixing plate, which is convenient for multi-position installation. 4. Anti-bending and torsion movement performance is good, can withstand a certain lateral load. 5. In addition to the axial, there are mounting holes on both sides of the cylinder, providing a variety of installation and fixing options. 6. There are two sets of intake and exhaust ports on both sides of the cylinder to choose from. 7. The front end of the body anti-collision pad can adjust the cylinder stroke and relieve the impact. 8. This series of standard configuration with magnets, do not provide configuration without magnets.

Read more less

$106.80

View options

You have seen 144 out of 193 products

Show more products