25001 products

SAIL Series ISO15552 Standard Cylinder (Locking Type)

  • Product Features
  • Specifications
  • Stroke Specifications
  • Product Ordering Code

Product Features

  • Locking Cylinder: Available in Front Cover Locking Type and Rear Cover Locking Type.
  • Unlocking Method: Automatic and Manual.

Specifications

Bore Size (mm) 40 50 63 80 100 125 160 200
Action Double Acting
Fluid Air (Filtered 40μm or better)
Mounting Basic, FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, TCM2
Operating Pressure 0.15~1.0MPa (22~145psi) (1.5~10.0bar)
Proof Pressure 1.5MPa (215psi) (15bar)
Temperature -20~70°C
Speed Range 30~800 mm/s 30~500 mm/s
Stroke Tolerance 0~250: +1.0/0
251~1000: +1.5/0
1001~1500: +2.0/0
Cushion Type Adjustable Cushion
Cushion Stroke Non-Locking End: Refer to standard cushion stroke
20mm 20mm 21mm 22.5mm 24mm 24mm 28mm
Port Size [Note 1] PT1/4 PT3/8 PT1/2 PT3/4
Note: [1] PT thread and G thread are available.

Standard Stroke

Bore Size (mm) Standard Stroke (mm) Max Stroke Allowable Stroke
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 1200 1800
50 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1800
63 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
80 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
100 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
125 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
160 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
200 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
Note: Please contact the company for other special strokes.

Product Ordering Code

No. Item Code Description
1 Model SAIL Standard Double Acting Locking Type (SAI)
2 Lock Position B Rear Cover Locking Type
F Front Cover Locking Type
3 Bore Size 40~200 40, 50, 63, 80, 100, 125, 160, 200
4 Stroke - Refer to Stroke Table
5 Magnet Blank No Magnet
S With Magnet
6 Mounting Blank Standard (No bracket)
LB, FA, FB, CA, CB, CR, FTC, TC Mounting accessories
7 Thread Type Blank PT Thread
G G Thread
Notes:
1. CR mounting is used with CB.
2. FTC and TC mountings are used with TCM1, TCM2.

Show previous products

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X866FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X866FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 866mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X866FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,102.68

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X871FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X871FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 871mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X871FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,112.43

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X842FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X842FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 842mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X842FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,055.43

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X865FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X865FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 865mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X865FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,100.65

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X846FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X846FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 846mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X846FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,063.29

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X838FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X838FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 838mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X838FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,047.60

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X857FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X857FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 857mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X857FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,084.94

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X843FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X843FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 843mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X843FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,057.48

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X853FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X853FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 853mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X853FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,077.11

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X855FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X855FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 855mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X855FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,081.02

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X861FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X861FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 861mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X861FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,092.80

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X848FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X848FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 848mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X848FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,067.23

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X854FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X854FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 854mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X854FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,079.00

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X844FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X844FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 844mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X844FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,059.37

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X851FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X851FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 851mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X851FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,073.17

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X859FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X859FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 859mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X859FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,088.88

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X835FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X835FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 835mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X835FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,041.63

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X850FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X850FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 850mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X850FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,071.14

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X840FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X840FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 840mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X840FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,051.51

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X852FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X852FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 852mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X852FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,075.06

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X858FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X858FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 858mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X858FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,086.86

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X847FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X847FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 847mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X847FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,065.31

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X829FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X829FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 829mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X829FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,029.86

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X841FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X841FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 841mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X841FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $3,053.54

    View options

You have seen 2376 out of 25001 products

Show more products

Login

Forgot your password?

Don't have an account yet?
Create account