25001 products

SAIL Series ISO15552 Standard Cylinder (Locking Type)

  • Product Features
  • Specifications
  • Stroke Specifications
  • Product Ordering Code

Product Features

  • Locking Cylinder: Available in Front Cover Locking Type and Rear Cover Locking Type.
  • Unlocking Method: Automatic and Manual.

Specifications

Bore Size (mm) 40 50 63 80 100 125 160 200
Action Double Acting
Fluid Air (Filtered 40μm or better)
Mounting Basic, FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, TCM2
Operating Pressure 0.15~1.0MPa (22~145psi) (1.5~10.0bar)
Proof Pressure 1.5MPa (215psi) (15bar)
Temperature -20~70°C
Speed Range 30~800 mm/s 30~500 mm/s
Stroke Tolerance 0~250: +1.0/0
251~1000: +1.5/0
1001~1500: +2.0/0
Cushion Type Adjustable Cushion
Cushion Stroke Non-Locking End: Refer to standard cushion stroke
20mm 20mm 21mm 22.5mm 24mm 24mm 28mm
Port Size [Note 1] PT1/4 PT3/8 PT1/2 PT3/4
Note: [1] PT thread and G thread are available.

Standard Stroke

Bore Size (mm) Standard Stroke (mm) Max Stroke Allowable Stroke
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 1200 1800
50 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1800
63 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
80 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
100 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
125 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
160 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
200 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
Note: Please contact the company for other special strokes.

Product Ordering Code

No. Item Code Description
1 Model SAIL Standard Double Acting Locking Type (SAI)
2 Lock Position B Rear Cover Locking Type
F Front Cover Locking Type
3 Bore Size 40~200 40, 50, 63, 80, 100, 125, 160, 200
4 Stroke - Refer to Stroke Table
5 Magnet Blank No Magnet
S With Magnet
6 Mounting Blank Standard (No bracket)
LB, FA, FB, CA, CB, CR, FTC, TC Mounting accessories
7 Thread Type Blank PT Thread
G G Thread
Notes:
1. CR mounting is used with CB.
2. FTC and TC mountings are used with TCM1, TCM2.

Show previous products

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X664FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X664FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 664mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X664FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,705.40

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X671FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X671FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 671mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X671FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,719.20

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X651FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X651FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 651mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X651FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,679.80

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X662FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X662FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 662mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X662FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,701.46

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X668FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X668FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 668mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X668FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,713.23

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X674FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X674FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 674mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X674FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,725.03

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X654FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X654FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 654mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X654FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,685.77

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X652FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X652FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 652mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X652FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,681.83

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X670FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X670FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 670mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X670FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,717.17

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X665FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X665FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 665mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X665FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,707.29

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X667FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X667FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 667mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X667FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,711.34

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X656FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X656FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 656mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X656FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,689.69

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X669FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X669FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 669mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X669FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,715.28

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X659FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X659FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 659mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X659FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,695.52

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X653FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X653FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 653mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X653FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,683.72

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X650FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X650FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 650mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X650FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,677.91

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X660FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X660FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 660mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X660FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,697.54

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X663FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X663FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 663mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X663FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,703.35

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X658FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X658FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 658mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X658FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,693.60

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X657FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X657FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 657mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X657FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,691.58

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X646FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X646FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 646mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X646FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,669.92

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X648FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X648FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 648mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X648FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,673.84

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X655FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X655FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 655mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X655FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,687.66

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X643FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X643FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 643mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X643FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,664.09

    View options

You have seen 2568 out of 25001 products

Show more products

Login

Forgot your password?

Don't have an account yet?
Create account