25001 products

SAIL Series ISO15552 Standard Cylinder (Locking Type)

  • Product Features
  • Specifications
  • Stroke Specifications
  • Product Ordering Code

Product Features

  • Locking Cylinder: Available in Front Cover Locking Type and Rear Cover Locking Type.
  • Unlocking Method: Automatic and Manual.

Specifications

Bore Size (mm) 40 50 63 80 100 125 160 200
Action Double Acting
Fluid Air (Filtered 40μm or better)
Mounting Basic, FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, TCM2
Operating Pressure 0.15~1.0MPa (22~145psi) (1.5~10.0bar)
Proof Pressure 1.5MPa (215psi) (15bar)
Temperature -20~70°C
Speed Range 30~800 mm/s 30~500 mm/s
Stroke Tolerance 0~250: +1.0/0
251~1000: +1.5/0
1001~1500: +2.0/0
Cushion Type Adjustable Cushion
Cushion Stroke Non-Locking End: Refer to standard cushion stroke
20mm 20mm 21mm 22.5mm 24mm 24mm 28mm
Port Size [Note 1] PT1/4 PT3/8 PT1/2 PT3/4
Note: [1] PT thread and G thread are available.

Standard Stroke

Bore Size (mm) Standard Stroke (mm) Max Stroke Allowable Stroke
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 1200 1800
50 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1800
63 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
80 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
100 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
125 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
160 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
200 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
Note: Please contact the company for other special strokes.

Product Ordering Code

No. Item Code Description
1 Model SAIL Standard Double Acting Locking Type (SAI)
2 Lock Position B Rear Cover Locking Type
F Front Cover Locking Type
3 Bore Size 40~200 40, 50, 63, 80, 100, 125, 160, 200
4 Stroke - Refer to Stroke Table
5 Magnet Blank No Magnet
S With Magnet
6 Mounting Blank Standard (No bracket)
LB, FA, FB, CA, CB, CR, FTC, TC Mounting accessories
7 Thread Type Blank PT Thread
G G Thread
Notes:
1. CR mounting is used with CB.
2. FTC and TC mountings are used with TCM1, TCM2.

Show previous products

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X745FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X745FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 745mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X745FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,864.70

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X744FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X744FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 744mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X744FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,862.68

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X725FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X725FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 725mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X725FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,825.33

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X742FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X742FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 742mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X742FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,858.76

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X738FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X738FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 738mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X738FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,850.90

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X737FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X737FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 737mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X737FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,849.01

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X731FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X731FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 731mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X731FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,837.11

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X740FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X740FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 740mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X740FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,854.82

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X735FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X735FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 735mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X735FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,844.94

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X734FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X734FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 734mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X734FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,843.05

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X736FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X736FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 736mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X736FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,846.99

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X730FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X730FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 730mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X730FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,835.19

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X732FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X732FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 732mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X732FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,839.13

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X729FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X729FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 729mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X729FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,833.16

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X728FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X728FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 728mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X728FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,831.27

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X720FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X720FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 720mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X720FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,815.59

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X726FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X726FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 726mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X726FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,827.36

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X727FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X727FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 727mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X727FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,829.25

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X718FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X718FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 718mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X718FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,811.51

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X717FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X717FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Travel: 717mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X717FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,809.62

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X721FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X721FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 721mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X721FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,817.48

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X713FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X713FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 713mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X713FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,801.76

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X719FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X719FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 719mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X719FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,813.54

    View options

  • Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X722FTC

    View options

    Airtac SAIL series: Standard double-action cylinder with lock - SAILF200X722FTC

    Specifications: Standard double action with lock type (SAI) Locking Position: Front Cover Attached Lock Type Bore: 200mm Stroke: 722mm Magnet: no magnet Fixed type: FTC Tooth type: PT tooth Specifications 1. Model: SAILF200X722FTC 2. Action type: double action type, working medium: air (filtered by filter screen above 40μm), fixed type: basic type, FA,FB,CA,CB,CR,LB,TC,FTC,TCM1,TCM2 3. Use pressure range: 0.15~1.0MPa(22~145psi)(1.5~10.0bar), Guaranteed pressure resistance: 1.5MPa(215psi)(15bar) 4. Working temperature ℃:-20~70, Use speed range mm/s:30~500, Travel tolerance range: 0~250+0/1.0,251~1000+0/1.5,1001~1500+0/2.0 5. Buffer type: adjustable buffer, buffer stroke (mm): no locking end 50, Attached lock end 28, Nozzle caliber: PT3/4 6. The nozzle tooth type is optional with PT tooth and G tooth, and the sensor can be optional: DMSE,CMSE Internal structure and main parts material: 1. nut: carbon steel/2. Piston rod: S45C hard chrome abrasive rod/3. Front cover o order: TPU/4. Front cover: Aluminum alloy/5. Bushing: wear-resistant material/6. Buffer O: TPU/7. Cylinder: Aluminum alloy/8.O-ring: NBR/9. Piston: Aluminum alloy/10. Piston O: NBR/11. Plunger: carbon steel/12. Wear ring: wear resistant material/13. Magnet: plastic (below 100), rubber (other)/14. Buffer gasket: TPU/15. Lock combination/16. Back cover: Aluminum alloy/17. Strut Nut: Carbon Steel Installation accessories :F-SI200LB Axial mounting F-SI200FA Flange connecting plate F-SI200CA Single-ear fixing seat F-SI200CB Binaural mount F-SI200CR Single-ear connection seat F-SI200TC Middle Trunnion Bracket F-SI200FTC Front cover trunnion bracket F-SI200TCM1 trunnion mount F-SI160TCM2 trunnion mount ， Piston rod end joint :F-M36X200I I Connector F-M36X200Y Y connector F-M36X200F Floating joint F-M36X200U fisheye joint Click to download Airtac product catalog Product Features 1. Cylinder with lock: front cover with lock type and rear cover with lock type. 2. Unlock mode: automatic and manual.

    Read more

    $2,819.50

    View options

You have seen 2496 out of 25001 products

Show more products

Login

Forgot your password?

Don't have an account yet?
Create account