HFT Series Large Caliber Air Gripper
Features
- Long Stroke: Designed with a long finger stroke, making it suitable for gripping large objects.
- Double Piston Drive: Utilizes a dual-piston mechanism to increase holding force.
- Rack & Pinion Sync: Uses a rack and pinion operation to ensure synchronous opening and closing of fingers with high repetition accuracy.
- Magnetic Control: All series come standard with attached magnets for easy control.
Specifications
| Bore Size (mm) | 10 | 16 | 20 | 25 | 32 |
|---|---|---|---|---|---|
| Acting Type | Double Acting | ||||
| Fluid | Air (to be filtered by 40μm filter element) | ||||
| Operating Pressure | 0.25~0.7MPa (36~100psi) |
0.15~0.7MPa (22~100psi) |
|||
| Proof Pressure | 1.2MPa (175psi) | ||||
| Temperature (°C) | -20~70 | ||||
| Lubrication | Cylinder Part: Not Required | ||||
| Cushion | Bumper | ||||
| Repeatability (mm) | ±0.1 | ||||
| Gripping Force (N) [Note 1] | 14 | 45 | 74 | 131 | 228 |
| Max. Frequency | 40 (c.p.m) | 20 (c.p.m) | |||
| Port Size | M5 x 0.8 | PT1/8 | |||
[Note 1] At 0.5MPa pressure and gripping point L=40mm (for Φ10~Φ25) or 80mm (for Φ32).
Stroke Specifications (mm)
| Bore Size | Standard Stroke | Max Stroke |
|---|---|---|
| 10 | 20, 30, 40, 60 | 60 |
| 16 | 30, 40, 60, 80 | 80 |
| 20 | 40, 60, 80, 100 | 100 |
| 25 | 40, 60, 80, 100 | 100 |
| 32 | 60, 80, 100, 150 | 150 |
Note: Contact the company for other special strokes.
Ordering Code
HFT 10 x 20 S □
| No. | Item | Code Description |
|---|---|---|
| ① | Series | HFT: Large Caliber Open Gripper (Double Acting) |
| ② | Bore Size | 10, 16, 20, 25, 32 (mm) |
| ③ | Stroke | Refer to Stroke Table (e.g., 20, 30, 40, etc.) |
| ④ | Magnet | S: With Magnet |
| ⑤ | Thread [Note 1] |
Blank: PT Thread G: G Thread T: NPT Thread |
[Note 1] Blank indicates Metric thread or PT thread. If G or NPT thread is required, please add G or T code.
