• 

  Quantity

  Airtac SC: Mounting Bracket for Cylinder Position Sensor - F-SC32SH

  Mounting bracket for cylinder position switch suitable for bore sizes: 32mm 40mm 50mm; compatible with SC SGC seriesCompatible with the following cylinder series:SCSGCDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS32

  Mounting bracket for cylinder position switch stainless steel for 32mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac SC: Mounting Bracket for Cylinder Position Sensor - F-SC63SH

  Mounting bracket for cylinder position switch suitable for 63mm bore size compatible with SC SGC seriesCompatible with the following cylinder series:SCSGCDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.75

  Quantity

• 

  Quantity

  Airtac SC: Mounting Bracket for Cylinder Position Sensor - F-SC125SH

  Mounting bracket for cylinder position switch suitable for 125mm bore size compatible with SC SGC seriesCompatible with the following cylinder series:SCSGCDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $3.27

  Quantity

• 

  Quantity

  Airtac SC: Mounting Bracket for Cylinder Position Sensor - F-SC160SH

  Mounting bracket for cylinder position switch suitable for bore sizes: 160mm 200mm; compatible with SC SGC seriesCompatible with the following cylinder series:SCSGCDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $3.20

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08C100

  Accessory,connecting wire,M8 socket,3-wire type,10meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $5.00

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS1-1/16

  CMS/DMS cylinder position switch mounting bracket for NPB series 1-1/16 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS63

  Mounting bracket for cylinder position switch stainless steel for 63mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS1-1/4

  CMS/DMS cylinder position switch mounting bracket for NPB series 1-1/4 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS2

  CMS/DMS cylinder position switch mounting bracket for NPB series 2 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS7/16

  CMS/DMS cylinder position switch mounting bracket for NPB series 7/16 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS1-3/4

  CMS/DMS cylinder position switch mounting bracket for NPB series 1-3/4 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS3/4

  CMS/DMS cylinder position switch mounting bracket for NPB series 3/4 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS7/8

  CMS/DMS cylinder position switch mounting bracket for NPB series 7/8 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA20

  Mounting bracket for cylinder position switch aluminum alloy for 20mm bore cylinder compatible with MCK MBL MAL seriesCompatible with the following cylinder series:MCKMBLMALDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS9/16

  CMS/DMS cylinder position switch mounting bracket for NPB series 9/16 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA25

  Mounting bracket for cylinder position switch aluminum alloy for 25mm bore cylinder compatible with MCK MBL MAL seriesCompatible with the following cylinder series:MCKMBLMALDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA40T

  Mounting bracket for cylinder position switch aluminum alloy thick type for 40mm bore cylinder compatible with TWG seriesCompatible with the following cylinder series:TWGDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS20

  Mounting bracket for cylinder position switch stainless steel for 20mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS25

  Mounting bracket for cylinder position switch stainless steel for 25mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS5/16

  CMS/DMS cylinder position switch mounting bracket for NPB series 5/16 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac SC: Mounting Bracket for Cylinder Position Sensor - F-SC250SH

  Mounting bracket for cylinder position switch suitable for 250mm bore size compatible with SC SGC seriesCompatible with the following cylinder series:SCSGCDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $3.87

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS2-1/2

  CMS/DMS cylinder position switch mounting bracket for NPB series 2-1/2 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQNS1-1/2

  CMS/DMS cylinder position switch mounting bracket for NPB series 1-1/2 inch bore sizeDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS16

  Mounting bracket for cylinder position switch stainless steel for 16mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS50

  Mounting bracket for cylinder position switch stainless steel for 50mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS40

  Mounting bracket for cylinder position switch stainless steel for 40mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac SC: Mounting Bracket for Cylinder Position Sensor - F-SC80SH

  Mounting bracket for cylinder position switch suitable for bore sizes: 80mm 100mm; compatible with SC SGC seriesCompatible with the following cylinder series:SCSGCDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.75

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA40

  Mounting bracket for cylinder position switch aluminum alloy for 40mm bore cylinder compatible with MCK MBL MAL seriesCompatible with the following cylinder series:MCKMBLMALDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA32T

  Mounting bracket for cylinder position switch aluminum alloy thick type for 32mm bore cylinder compatible with TWG seriesCompatible with the following cylinder series:TWGDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA32

  Mounting bracket for cylinder position switch aluminum alloy for 32mm bore cylinder compatible with MCK MBL MAL seriesCompatible with the following cylinder series:MCKMBLMALDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.13

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA50

  Mounting bracket for cylinder position switch aluminum alloy for 50mm bore cylinder compatible with MCK MBL MAL seriesCompatible with the following cylinder series:MCKMBLMALDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA50T

  Mounting bracket for cylinder position switch aluminum alloy thick type for 50mm bore cylinder compatible with TWG seriesCompatible with the following cylinder series:TWGDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA80

  Mounting bracket for cylinder position switch aluminum alloy for 80mm bore cylinder compatible with MCK MBL MAL seriesCompatible with the following cylinder series:MCKMBLMALDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQA63

  Mounting bracket for cylinder position switch aluminum alloy for 63mm bore cylinder compatible with MCK MBL MAL seriesCompatible with the following cylinder series:MCKMBLMALDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $2.53

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS06

  Mounting bracket for cylinder position switch stainless steel for 6mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $1.87

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS08

  Mounting bracket for cylinder position switch stainless steel for 8mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $1.87

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS10

  Mounting bracket for cylinder position switch stainless steel for 10mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $1.87

  Quantity

• 

  Quantity

  Airtac MQ: Mounting Bracket for Cylinder Position Sensor - F-MQS12

  Mounting bracket for cylinder position switch stainless steel for 12mm bore cylinder compatible with the following series: PB/PBR MI MF MG MA/MACCompatible with the following cylinder series:PB/PBRMIMFMGMA/MACDownload the Airtac catalog for DMS/CMS Cylinder Switches

  Read more less

  $1.87

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C100

  Accessory,connecting wire,M12 socket,3-wire type,10meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $5.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C050

  Accessory,connecting wire,M12 socket,3-wire type,5meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $3.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C030

  Accessory,connecting wire,M12 socket,3-wire type,3meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $2.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12C020

  Accessory,connecting wire,M12 socket,3-wire type,2meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $1.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B100

  Accessory,connecting wire,M12 socket,2-wire type,10meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $5.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B050

  Accessory,connecting wire,M12 socket,2-wire type,5meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $3.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B030

  Accessory,connecting wire,M12 socket,2-wire type,3meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $2.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM12B020

  Accessory,connecting wire,M12 socket,2-wire type,2meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $1.00

  Quantity

• 

  Quantity

  Airtac DMS/EMS/CMS: Sensor,accessory,connecting wire - F-ECM08C050

  Accessory,connecting wire,M8 socket,3-wire type,5meters,general type Instruction:1.Sensor shall not fall down or bear great impact when it is installed.2.The wire of the Sensor shall not move with the action of cylinder.3.Clamping torque shall be within the allowable scope when the Sensor is installed(0.15~0.2Nm).4.Sensor shall be installed in the middle position of the action scope.5.Sensor wiring:A.The wire is unable to bear repetitive torsion and tension.Please wire an external load before switch the power on.B.No poor insulation in wire.C.Do not wire with power line,high voltage line or use one wiring pipe.D.Pleas wire the circuit correctly base on the circuit diagram.6.Execute scheduled maintenance by the following guidelines:A.Make sure the sensor is firmly fixed.B.Make sure the wire is intact.C.Make sure that LED indicate the movement of cylinder correctly.7.Application of environment:A.It is Not allow to use the sensor in the environment with explosive gas.B.Magnetic sensor shall not be used in the environment with external magnetism.C.Magnetic sensor shall not be used in the environment that is always eroded by water.D.Magnetic sensor shall not be used in the environment with oil moisture or chemical substance.E.Magnetic sensor shall not be used in the environment with periodically changing temperature.F.Magnetic sensor shall not be used in the environment with excessively great impact.G.Magnetic sensor shall not be used in the environment with sources of electrical pulse.H.Avoid the environment with accumulated iron power and dense magnetic objects.

  Read more less

  $3.00

  Quantity

Show more products