Airtac CLA110 series: replacement solenoid coil - CLA110KEH

Photos are for reference only. Not all models have pictures.

Description

Specifications: CLA110KEH is an AirTAC 110-series solenoid coil, not a complete valve. CL specifies grommet / flying-lead connection; A110 identifies a 10.0 mm coil bore; E selects AC24V; H selects Class H. K selects a normally-open valve application. This exact order is listed for 2KLA; applicable size groups and connection conditions are listed below.

Product Catalogs and Comparison Guide

Download Airtac 2KL Product Catalog (PDF)

Download Airtac 2KLA Product Catalog (PDF)

Legacy coil and mounting-accessory selection: catalog page 205 (PDF)

Download Original Product Reference (PDF)

For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

AirTAC 2KL vs 2KLA: Dimensions and Replacement Guide

The valve catalogs and comparison guide provide series background. They do not turn this separately ordered component into a complete valve or establish an automatic component replacement.

Applicable Valve Series and Ordering Check

Applicable valve series for CLA110KEH: 2KLA. Only the model groups in the table below are listed for this exact coil selection. The coil has a 10.0 mm bore, grommet / flying-lead entry, AC24V supply and Class H insulation. Match all four conditions to the valve and existing coil.

Valve series and normal state Applicable valve model groups
2KLA — normally open (NO) 2KLA030, 2KLA150, 2KLA200, 2KLA250 model groups.

The K in this coil ordering code selects normally-open (NO) service. The table above has already been restricted to that normal state and this order's insulation class. Do not treat the combined NC/NO columns in the general selection chart as an interchangeable coil list.

The final H selects Class H, which the shared selection chart assigns to 2KLA. The reference is the shared "Coil and accessories" page in the supplied 2KLA catalog, PDF page 5, printed page 196; that page explicitly covers multiple valve series.

These are model-group names, not complete valve ordering codes. The 030 groups in the selection chart include an intervening pressure-option position. Keep any such pressure option and all port, thread, voltage and electrical-entry suffixes of the actual valve order. The other model groups listed above are discrete catalog codes, not a continuous numerical range.

Ordering check: order CLA110KEH for the listed valve groups when AC24V, grommet / flying-lead entry, a 10.0 mm bore and Class H are required. Confirm the complete valve code, installed coil marking and normal state before replacement.

This order uses flying leads (grommet entry). The PL2925/PL3030 terminal-connector assignments are not the wiring arrangement for this CLA coil.

A Class H coil is not automatically interchangeable with another insulation class or generation. The older 116/170 bores are 11.6/17.0 mm; the newer 110/160 bores are 10.0/16.0 mm. These physical differences prevent a simple “add A” coil substitution.

Component Identity and Ordering

Parameter Details
Product type Separately ordered solenoid coil
Current ordering code CLA110KEH
Coil-bore code A110 — 10.0 mm bore
Electrical entry CL — grommet / flying lead
Voltage E — AC24V
Valve-type position normally open (K code)
Insulation suffix H — Class H
Automatic replacement No automatic A-suffix conversion is established for coils. Confirm the valve, bore, voltage, normal state and insulation class.

Coil Electrical Data

Class H data scope: the ordering and selection charts identify this H-class coil for the valve series listed above. The shared numerical electrical matrix is labeled Class F and does not separately certify power consumption or temperature rise for this H-class order. The numerical entries below are that general catalog reference; confirm the exact H-coil nameplate and the relevant valve-specific data.

Parameter Details
Voltage tolerance ±15%
Frequency 50 or 60 Hz
Insulation class for this order H
Application selected by code Normally open
Power consumption — general Class F reference 15 VA at 50 Hz; 11 VA at 60 Hz
Temperature rise — general Class F reference 50°C at 50 Hz; 45°C at 60 Hz

These are the independent coil-page values, not values copied from a complete valve. Pressure, fluid temperature, valve-body material and valve flow coefficient are not specifications of this loose coil. No separate coil weight is listed.

The general coil specification table is headed Class F, while its ordering and selection tables also offer Class H. It does not provide a separate complete power/temperature-rise matrix for H variants. The 2KLA valve-specific pages additionally differ from the general normally-open power table. Confirm the nameplate of the exact coil before substituting it into a valve.

Connection and Components

The hookup drawing places the coil across numbered terminals 1 and 2 for the shown AC/DC connection. Match the ordered voltage and follow the source diagram.

This is the grommet / flying-lead entry. The independent coil page does not separately specify its loose-coil lead length; do not automatically transfer a complete-valve cable specification.

Dimensions and Weight

Parameter Details
Bore diameter 10.0 mm
Separate coil envelope dimensions Not listed in this supplied coil page
Separate coil weight Not listed; no complete-valve mass is substituted

For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

Coil Ordering Options

Parameter Details
Connection CD = terminal; CL = grommet
Bore family A110 = Ø10.0 mm; A160 = Ø16.0 mm
Valve-type code Omitted = normally closed; K = normally open
Voltage A = AC220V; B = DC24V; C = AC110V; E = AC24V; F = DC12V
Heat-class code Omitted = Class F; H = Class H

Reference Weight

Estimated reference weight: 110 g. The mass reference is the DOLD listing for CLA110EH, which lists an item weight of 110 g. This is a supplier listing reference, not an AirTAC catalog net-weight specification. The listed normally closed coil with the same size, entry, voltage and insulation selection is used for this K normally open variant; any K-specific construction mass difference is not corrected. This is a reference estimate, not a manufacturer-published weight for this exact configuration or an individually measured or packaged shipping weight. Actual supplied mass can differ.

Product form

Specifications: CLA110KEH is an AirTAC 110-series solenoid coil, not a complete valve. CL specifies grommet / flying-lead connection; A110 identifies... Read more

SKU: CLA110KEH

$16.99 Incl. VAT

    Guaranteed secure & safe checkout.

    Ach Direct DebitAmazon American Express Apple Pay BizumDiners ClubDiscoverGoogle Pay Mastercard MB WAY PayPalSatispayShop Pay USDC Visa

    Bank transfer also available. Payment options may vary by location and device.

    Shipping, returns & order help

    Free shipping on orders US$30+ under 2 kg

    Import duties & taxes included on all orders

    Download: 3D model selection.
    Shipping & delivery times

    In-stock items: processed and shipped within 1–3 business days. Custom-made items: G/NPT threads and non-standard specifications require 7–15 business days of factory production before shipping.

    Standard international delivery typically takes 7–13 business days after dispatch, depending on customs clearance and the local delivery network. Processing or production time is additional. Next-day and overnight delivery are not available.

    Most products ship from our manufacturing centers in Asia, then transfer to a local carrier after customs clearance.

    Read our shipping policy
    Shipping costs & import taxes

    Free shipping: orders of US$30 or more weighing under 2 kg. Import duties and taxes are included on all orders.

    If an overweight shipping surcharge applies after packing, we pause shipment and email you the amount for approval before dispatch. This is a transport charge, not an import tax. If you do not reply within 7 days, the order is canceled and fully refunded.

    Shipping charges and tax details
    Model selection & custom orders

    Please check the full model number, dimensions, thread type, stroke and voltage where applicable before ordering. If you are unsure, email airtacs@airtacs.com with the model number and required specifications.

    Custom-made products, including G/NPT thread specifications and custom-built parts, are non-returnable and non-refundable under our refund policy.

    Read the refund policy before ordering
    Tracking & delivery support

    Use the tracking link in your shipping confirmation email. For YunExpress shipments, enter your YT tracking number at Yuntrack to view the journey and local delivery details.

    Provide a complete physical delivery address and reachable contact details. P.O. boxes and virtual mail-forwarding addresses are not accepted.

    If delivery fails, contact the local carrier and email airtacs@airtacs.com with your order and tracking numbers. For failures caused by an incorrect/incomplete address or an unreachable recipient, return to the local warehouse typically takes 7–30 business days. Redelivery requires an additional shipping fee; cancellation after failed delivery is subject to deductions for original shipping and carrier return fees.

    Delivery issue policy
    Returns & product issues

    Eligible returns are accepted within 7 days of delivery. Items must be unused, uninstalled and in their original factory packaging. Contact airtacs@airtacs.com for a Return Authorization (RA) number before returning anything.

    Ordered the wrong model or changed your mind? You pay return shipping, original shipping is non-refundable, and a 50% restocking fee is deducted from the actual price paid for the returned product.

    Defective, damaged or incorrect item? We provide a replacement and cover return shipping; no restocking fee applies. Custom-made items are excluded from standard returns. These terms are subject to applicable law and do not limit your statutory rights.

    Read the full refund policy
    Bank transfers & invoices

    Bank transfer: Select bank transfer at checkout and submit your order. The bank account details and payment instructions will then be displayed.

    Invoices: Invoices are available only after an order is placed. We are a US-based company and provide a standard commercial invoice, not an EU VAT tax invoice. If your company requires an EU VAT invoice, please confirm your requirements with us before ordering.

    For payment or invoice questions, email airtacs@airtacs.com with your order number.

    Description

    Specifications: CLA110KEH is an AirTAC 110-series solenoid coil, not a complete valve. CL specifies grommet / flying-lead connection; A110 identifies a 10.0 mm coil bore; E selects AC24V; H selects Class H. K selects a normally-open valve application. This exact order is listed for 2KLA; applicable size groups and connection conditions are listed below.

    Product Catalogs and Comparison Guide

    Download Airtac 2KL Product Catalog (PDF)

    Download Airtac 2KLA Product Catalog (PDF)

    Legacy coil and mounting-accessory selection: catalog page 205 (PDF)

    Download Original Product Reference (PDF)

    For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

    AirTAC 2KL vs 2KLA: Dimensions and Replacement Guide

    The valve catalogs and comparison guide provide series background. They do not turn this separately ordered component into a complete valve or establish an automatic component replacement.

    Applicable Valve Series and Ordering Check

    Applicable valve series for CLA110KEH: 2KLA. Only the model groups in the table below are listed for this exact coil selection. The coil has a 10.0 mm bore, grommet / flying-lead entry, AC24V supply and Class H insulation. Match all four conditions to the valve and existing coil.

    Valve series and normal state Applicable valve model groups
    2KLA — normally open (NO) 2KLA030, 2KLA150, 2KLA200, 2KLA250 model groups.

    The K in this coil ordering code selects normally-open (NO) service. The table above has already been restricted to that normal state and this order's insulation class. Do not treat the combined NC/NO columns in the general selection chart as an interchangeable coil list.

    The final H selects Class H, which the shared selection chart assigns to 2KLA. The reference is the shared "Coil and accessories" page in the supplied 2KLA catalog, PDF page 5, printed page 196; that page explicitly covers multiple valve series.

    These are model-group names, not complete valve ordering codes. The 030 groups in the selection chart include an intervening pressure-option position. Keep any such pressure option and all port, thread, voltage and electrical-entry suffixes of the actual valve order. The other model groups listed above are discrete catalog codes, not a continuous numerical range.

    Ordering check: order CLA110KEH for the listed valve groups when AC24V, grommet / flying-lead entry, a 10.0 mm bore and Class H are required. Confirm the complete valve code, installed coil marking and normal state before replacement.

    This order uses flying leads (grommet entry). The PL2925/PL3030 terminal-connector assignments are not the wiring arrangement for this CLA coil.

    A Class H coil is not automatically interchangeable with another insulation class or generation. The older 116/170 bores are 11.6/17.0 mm; the newer 110/160 bores are 10.0/16.0 mm. These physical differences prevent a simple “add A” coil substitution.

    Component Identity and Ordering

    Parameter Details
    Product type Separately ordered solenoid coil
    Current ordering code CLA110KEH
    Coil-bore code A110 — 10.0 mm bore
    Electrical entry CL — grommet / flying lead
    Voltage E — AC24V
    Valve-type position normally open (K code)
    Insulation suffix H — Class H
    Automatic replacement No automatic A-suffix conversion is established for coils. Confirm the valve, bore, voltage, normal state and insulation class.

    Coil Electrical Data

    Class H data scope: the ordering and selection charts identify this H-class coil for the valve series listed above. The shared numerical electrical matrix is labeled Class F and does not separately certify power consumption or temperature rise for this H-class order. The numerical entries below are that general catalog reference; confirm the exact H-coil nameplate and the relevant valve-specific data.

    Parameter Details
    Voltage tolerance ±15%
    Frequency 50 or 60 Hz
    Insulation class for this order H
    Application selected by code Normally open
    Power consumption — general Class F reference 15 VA at 50 Hz; 11 VA at 60 Hz
    Temperature rise — general Class F reference 50°C at 50 Hz; 45°C at 60 Hz

    These are the independent coil-page values, not values copied from a complete valve. Pressure, fluid temperature, valve-body material and valve flow coefficient are not specifications of this loose coil. No separate coil weight is listed.

    The general coil specification table is headed Class F, while its ordering and selection tables also offer Class H. It does not provide a separate complete power/temperature-rise matrix for H variants. The 2KLA valve-specific pages additionally differ from the general normally-open power table. Confirm the nameplate of the exact coil before substituting it into a valve.

    Connection and Components

    The hookup drawing places the coil across numbered terminals 1 and 2 for the shown AC/DC connection. Match the ordered voltage and follow the source diagram.

    This is the grommet / flying-lead entry. The independent coil page does not separately specify its loose-coil lead length; do not automatically transfer a complete-valve cable specification.

    Dimensions and Weight

    Parameter Details
    Bore diameter 10.0 mm
    Separate coil envelope dimensions Not listed in this supplied coil page
    Separate coil weight Not listed; no complete-valve mass is substituted

    For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

    Coil Ordering Options

    Parameter Details
    Connection CD = terminal; CL = grommet
    Bore family A110 = Ø10.0 mm; A160 = Ø16.0 mm
    Valve-type code Omitted = normally closed; K = normally open
    Voltage A = AC220V; B = DC24V; C = AC110V; E = AC24V; F = DC12V
    Heat-class code Omitted = Class F; H = Class H

    Reference Weight

    Estimated reference weight: 110 g. The mass reference is the DOLD listing for CLA110EH, which lists an item weight of 110 g. This is a supplier listing reference, not an AirTAC catalog net-weight specification. The listed normally closed coil with the same size, entry, voltage and insulation selection is used for this K normally open variant; any K-specific construction mass difference is not corrected. This is a reference estimate, not a manufacturer-published weight for this exact configuration or an individually measured or packaged shipping weight. Actual supplied mass can differ.

    Recently viewed products

      Footer image

      © 2026 Airtac, Powered by Shopify

      • US (USD $) US (USD $)
      • Ach Direct Debit
      • Amazon
      • American Express
      • Apple Pay
      • Bizum
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • MB WAY
      • PayPal
      • Satispay
      • Shop Pay
      • USDC
      • Visa