Airtac X-KCV series: pneumatic vacuum generator - X-KCV25HSC

Photos are for reference only. Not all models have pictures.

Description

Specifications: X-KCV25HSC. A 2.5 mm nozzle vacuum generator with non-adjustable pressure switch, 160 L/min catalog vacuum flow and -92 kPa attainable vacuum.

Product Catalog

Download Airtac Product Catalog (PDF)

For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

Model Code Explained

Code Meaning for this model
X-KCV Basic vacuum generator
25 Nozzle Ø2.5 mm
H High-vacuum / pressure type
S Rated supply 0.5 MPa
C Non-adjustable pressure switch

Technical Specifications

Parameter Details
Working medium Oil-free compressed air
Ambient temperature 0–60°C; no freezing
Operating supply pressure 0.1–0.6 MPa
Nozzle diameter 2.5 mm
Rated supply pressure 0.5 MPa
Vacuum flow 160 L/min
Attainable vacuum pressure -92 kPa
Air consumption 265 L/min
Pressure switch Non-adjustable pressure switch

Internal Construction

Parameter Details
1 — Nozzle Brass
2 — Body Aluminum
3 — Silencer PE

Catalog Notes

  • The performance table gives the values for each nozzle and H/L/S/R combination. The generic ordering key labels H as −87 kPa and L as −53 kPa; use the model-specific performance values above for selection.
  • The catalog prints a 0.45 MPa supply note below the technical table, alongside the separately stated S/R rated pressures. Check the intended supply condition when comparing performance.
  • R supply-pressure versions are offered only for high-vacuum sizes 10, 15 and 20. Size 30 is supplied only without a pressure switch.

The C option identifies a non-adjustable pressure switch. The published electrical and setting table is explicitly headed CK; those CK ratings are not assigned to the C option.

Performance Curves

The catalog curves are for X-KCV10LS at 0.5 MPa supply. The flow graph plots vacuum magnitude from 0 to 55 kPa against flow in L/min (printed vertical scale through 50). The evacuation graph plots vacuum magnitude from 10 to 55 kPa against evacuation time in s/L (printed vertical scale through 2). These curves are reference data for that illustrated configuration, not independent curves for every nozzle size.

Dimensions and Mounting

Parameter Details
A 100 mm
B 60 mm
C 40 mm
D 20 mm
E 16 mm
F 20 mm
G 50 mm
H 5.5 mm
I — mounting holes 2 × Ø6
J — vacuum port PT1/2
K 17 mm
L — supply port PT3/8
M 119 mm
N Ø37
O 40 mm
P 236 mm
Silencer thread G3/4

For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

Reference Weight

Parameter Details
Weight 840 g — estimated reference; not an AirTAC published or measured weight.
Product form

Specifications: X-KCV25HSC. A 2.5 mm nozzle vacuum generator with non-adjustable pressure switch, 160 L/min catalog vacuum flow and -92 kPa... Read more

SKU: X-KCV25HSC

$95.90 Incl. VAT

    Guaranteed secure & safe checkout.

    Ach Direct DebitAmazon American Express Apple Pay BizumDiners ClubDiscoverGoogle Pay Mastercard MB WAY PayPalSatispayShop Pay USDC Visa

    Bank transfer also available. Payment options may vary by location and device.

    Shipping, returns & order help

    Free shipping on orders US$30+ under 2 kg

    Import duties & taxes included on all orders

    Download: 3D model selection.
    Shipping & delivery times

    In-stock items: processed and shipped within 1–3 business days. Custom-made items: G/NPT threads and non-standard specifications require 7–15 business days of factory production before shipping.

    Standard international delivery typically takes 7–13 business days after dispatch, depending on customs clearance and the local delivery network. Processing or production time is additional. Next-day and overnight delivery are not available.

    Most products ship from our manufacturing centers in Asia, then transfer to a local carrier after customs clearance.

    Read our shipping policy
    Shipping costs & import taxes

    Free shipping: orders of US$30 or more weighing under 2 kg. Import duties and taxes are included on all orders.

    If an overweight shipping surcharge applies after packing, we pause shipment and email you the amount for approval before dispatch. This is a transport charge, not an import tax. If you do not reply within 7 days, the order is canceled and fully refunded.

    Shipping charges and tax details
    Model selection & custom orders

    Please check the full model number, dimensions, thread type, stroke and voltage where applicable before ordering. If you are unsure, email airtacs@airtacs.com with the model number and required specifications.

    Custom-made products, including G/NPT thread specifications and custom-built parts, are non-returnable and non-refundable under our refund policy.

    Read the refund policy before ordering
    Tracking & delivery support

    Use the tracking link in your shipping confirmation email. For YunExpress shipments, enter your YT tracking number at Yuntrack to view the journey and local delivery details.

    Provide a complete physical delivery address and reachable contact details. P.O. boxes and virtual mail-forwarding addresses are not accepted.

    If delivery fails, contact the local carrier and email airtacs@airtacs.com with your order and tracking numbers. For failures caused by an incorrect/incomplete address or an unreachable recipient, return to the local warehouse typically takes 7–30 business days. Redelivery requires an additional shipping fee; cancellation after failed delivery is subject to deductions for original shipping and carrier return fees.

    Delivery issue policy
    Returns & product issues

    Eligible returns are accepted within 7 days of delivery. Items must be unused, uninstalled and in their original factory packaging. Contact airtacs@airtacs.com for a Return Authorization (RA) number before returning anything.

    Ordered the wrong model or changed your mind? You pay return shipping, original shipping is non-refundable, and a 50% restocking fee is deducted from the actual price paid for the returned product.

    Defective, damaged or incorrect item? We provide a replacement and cover return shipping; no restocking fee applies. Custom-made items are excluded from standard returns. These terms are subject to applicable law and do not limit your statutory rights.

    Read the full refund policy
    Bank transfers & invoices

    Bank transfer: Select bank transfer at checkout and submit your order. The bank account details and payment instructions will then be displayed.

    Invoices: Invoices are available only after an order is placed. We are a US-based company and provide a standard commercial invoice, not an EU VAT tax invoice. If your company requires an EU VAT invoice, please confirm your requirements with us before ordering.

    For payment or invoice questions, email airtacs@airtacs.com with your order number.

    Description

    Specifications: X-KCV25HSC. A 2.5 mm nozzle vacuum generator with non-adjustable pressure switch, 160 L/min catalog vacuum flow and -92 kPa attainable vacuum.

    Product Catalog

    Download Airtac Product Catalog (PDF)

    For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

    Model Code Explained

    Code Meaning for this model
    X-KCV Basic vacuum generator
    25 Nozzle Ø2.5 mm
    H High-vacuum / pressure type
    S Rated supply 0.5 MPa
    C Non-adjustable pressure switch

    Technical Specifications

    Parameter Details
    Working medium Oil-free compressed air
    Ambient temperature 0–60°C; no freezing
    Operating supply pressure 0.1–0.6 MPa
    Nozzle diameter 2.5 mm
    Rated supply pressure 0.5 MPa
    Vacuum flow 160 L/min
    Attainable vacuum pressure -92 kPa
    Air consumption 265 L/min
    Pressure switch Non-adjustable pressure switch

    Internal Construction

    Parameter Details
    1 — Nozzle Brass
    2 — Body Aluminum
    3 — Silencer PE

    Catalog Notes

    • The performance table gives the values for each nozzle and H/L/S/R combination. The generic ordering key labels H as −87 kPa and L as −53 kPa; use the model-specific performance values above for selection.
    • The catalog prints a 0.45 MPa supply note below the technical table, alongside the separately stated S/R rated pressures. Check the intended supply condition when comparing performance.
    • R supply-pressure versions are offered only for high-vacuum sizes 10, 15 and 20. Size 30 is supplied only without a pressure switch.

    The C option identifies a non-adjustable pressure switch. The published electrical and setting table is explicitly headed CK; those CK ratings are not assigned to the C option.

    Performance Curves

    The catalog curves are for X-KCV10LS at 0.5 MPa supply. The flow graph plots vacuum magnitude from 0 to 55 kPa against flow in L/min (printed vertical scale through 50). The evacuation graph plots vacuum magnitude from 10 to 55 kPa against evacuation time in s/L (printed vertical scale through 2). These curves are reference data for that illustrated configuration, not independent curves for every nozzle size.

    Dimensions and Mounting

    Parameter Details
    A 100 mm
    B 60 mm
    C 40 mm
    D 20 mm
    E 16 mm
    F 20 mm
    G 50 mm
    H 5.5 mm
    I — mounting holes 2 × Ø6
    J — vacuum port PT1/2
    K 17 mm
    L — supply port PT3/8
    M 119 mm
    N Ø37
    O 40 mm
    P 236 mm
    Silencer thread G3/4

    For detailed product dimensions and mounting drawings, please download and refer to the PDF catalog.

    Reference Weight

    Parameter Details
    Weight 840 g — estimated reference; not an AirTAC published or measured weight.

    Recently viewed products

      Footer image

      © 2026 Airtac, Powered by Shopify

      • US (USD $) US (USD $)
      • Ach Direct Debit
      • Amazon
      • American Express
      • Apple Pay
      • Bizum
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • MB WAY
      • PayPal
      • Satispay
      • Shop Pay
      • USDC
      • Visa