{"product_id":"airtac-sc-series-standard-double-acting-cylinder-sc200x449scbt","title":"Airtac SC series: double-acting cylinder - SC200X449SCBT","description":"\u003cdiv class=\"scp\" style=\"font-family:Arial,Helvetica,sans-serif;font-size:15px;line-height:1.6;color:#253442;max-width:100%;overflow-wrap:anywhere\"\u003e\n\u003cstyle\u003e@scope{.sct{border-collapse:collapse}.sct :is(th,td){font-size:14px!important;vertical-align:top}.sct tbody\u003etr{border-bottom:1px solid #d8e1e7}.sct th{text-align:left}.sct th:first-child{width:38%}.sct thead\u003etr{background:#eef3f6}:scope\u003ep{margin:10px 0}:scope\u003eh3{font-size:18px;color:#172f42;margin:22px 0 10px}.scw{margin:12px 0}}\u003c\/style\u003e\n\u003cp\u003eSpecifications: SC200X449SCBT — Airtac SC double-acting, single-rod tie-rod cylinder; 200 mm bore, 449 mm stroke, with magnet, NBR seal option and NPT3\/4 ports. Mounting configuration: rear double clevis.\u003c\/p\u003e\n\u003ch3\u003eProduct Catalog\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/2336\/1327\/files\/airtac-sc-ok3.pdf?v=1780217143\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;background:#0067a5;color:#fff;padding:10px 16px;text-decoration:none;border-radius:4px;max-width:100%;box-sizing:border-box\"\u003eDownload Airtac Product Catalog (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor product dimensions and mounting drawings, download and refer to the PDF catalog.\u003c\/p\u003e\n\u003ch3\u003eModel Code Explained\u003c\/h3\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eCode\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMeaning\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSC\u003c\/td\u003e\n\u003ctd\u003eDouble-acting, single-rod SC cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e200 mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX\u003c\/td\u003e\n\u003ctd\u003eSeparator before stroke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e449\u003c\/td\u003e\n\u003ctd\u003e449 mm stroke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003eWith magnetic piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCB\u003c\/td\u003e\n\u003ctd\u003eRear double clevis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo seal-material suffix\u003c\/td\u003e\n\u003ctd\u003eNBR option; individual seal materials follow the basic component table\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003ctd\u003eNPT3\/4 ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eParameter\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSC200X449SCBT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAction\u003c\/td\u003e\n\u003ctd\u003eDouble acting, single rod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStroke\u003c\/td\u003e\n\u003ctd\u003e449 mm; Special stroke; confirm order and delivery conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eTie-rod SC cylinder; ISO 6430 as stated in the catalogue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston rod\u003c\/td\u003e\n\u003ctd\u003eS45C hard-chrome-plated ground rod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic piston\u003c\/td\u003e\n\u003ctd\u003eWith magnet; sensors are separately selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting selection\u003c\/td\u003e\n\u003ctd\u003eRear double clevis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal option\u003c\/td\u003e\n\u003ctd\u003eNBR; this does not mean every internal seal uses one material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort thread\u003c\/td\u003e\n\u003ctd\u003eNPT3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking medium\u003c\/td\u003e\n\u003ctd\u003eClean compressed air filtered through 40 µm or finer filtration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating pressure\u003c\/td\u003e\n\u003ctd\u003e0.15–1 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProof pressure\u003c\/td\u003e\n\u003ctd\u003e1.5 MPa; not the continuous operating pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−20 to 70 °C; avoid freezing condensate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston speed\u003c\/td\u003e\n\u003ctd\u003e30–500 mm\/s; select controls for the actual load and piping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStroke tolerance\u003c\/td\u003e\n\u003ctd\u003e+1.5 \/ 0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCushioning\u003c\/td\u003e\n\u003ctd\u003eAdjustable pneumatic cushioning at both ends; 33 mm nominal cushion-stroke reference. A shorter cylinder stroke cannot provide the full nominal deceleration travel.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod diameter \/ end thread\u003c\/td\u003e\n\u003ctd\u003e40 mm \/ M36×2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor selection\u003c\/td\u003e\n\u003ctd\u003eCMSG, DMSG or EMSG G-profile sensor with the specified tie-rod mounting hardware; select an exact version separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalculated weight reference\u003c\/td\u003e\n\u003ctd\u003e20242.76 g (20.24276 kg); basic cylinder, excluding separately specified mounts and accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eWeight basis: 9808 g non-stroke mass + 449 mm × 23.24 g\/mm. Catalog estimate, not measured or packed shipping weight. Unpublished mount\/accessory masses, including any selected TC+TCM1 package, are excluded. Actual supplied mass prevails.\u003c\/p\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cp\u003eThe large-bore SC range is specified to ISO 6430. Its compact bidirectional piston seal incorporates an oil-reservoir function, and tie rods connect the end covers to the aluminium barrel. At the same bore, SC has a shorter overall length than ISO 15552 standard cylinders; this does not establish interchangeability. Pneumatic cushioning is adjustable. Magnetic-piston and mounting options are available according to the selected configuration. The 150 °C feature requires specified high-temperature seals; it is not the rating of this default NBR selection. Confirm the exact special-cylinder rating.\u003c\/p\u003e\n\u003ch3\u003eExternal and Mounting Dimensions\u003c\/h3\u003e\n\u003cp\u003eDimensions: mm except threads; magnetic and nonmagnetic bodies share dimensions. A + stroke is the illustrated bare-length reference: add no unspecified projection. It excludes mounts, rod-end joints, fittings, sensors and packaging, so is not the installed envelope.\u003c\/p\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eParameter\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA + stroke, retracted\u003c\/td\u003e\n\u003ctd\u003e693 mm = 244 + 449; illustrated basic-cylinder end-to-end reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC + stroke, body face span\u003c\/td\u003e\n\u003ctd\u003e575 mm = 126 + 449\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDerived bare length, fully extended\u003c\/td\u003e\n\u003ctd\u003e1142 mm = 244 + 2 × 449\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody width × height\u003c\/td\u003e\n\u003ctd\u003e214 × 214 mm (□B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRod diameter \/ end thread\u003c\/td\u003e\n\u003ctd\u003eD = 40 mm; E = M36×2.0; EA = 72 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing dimensions (mm; threads labelled)\u003c\/td\u003e\n\u003ctd\u003eAB = 118; AD = 38; AE = 38; DA = 88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing dimensions (mm; threads labelled)\u003c\/td\u003e\n\u003ctd\u003eF = 55; FA = 18; H = 36; K = M16×2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing dimensions (mm; threads labelled)\u003c\/td\u003e\n\u003ctd\u003eKA = 21; KB = 163; M = 62; MA = 30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing dimensions (mm; threads labelled)\u003c\/td\u003e\n\u003ctd\u003eP = NPT3\/4; PA = 20; PB = 15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eParameter\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSelected accessory\u003c\/td\u003e\n\u003ctd\u003eCB; part F-SC200CB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eDuctile cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA + stroke\u003c\/td\u003e\n\u003ctd\u003e693 mm = 244 + 449\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC + stroke\u003c\/td\u003e\n\u003ctd\u003e575 mm = 126 + 449\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing dimensions (mm)\u003c\/td\u003e\n\u003ctd\u003eS = 213; CC = 60; CD = 23; CE = 28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing dimensions (mm)\u003c\/td\u003e\n\u003ctd\u003eCJ = 90; CP = 40.1; CT = 80; PA1 = 90.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrawing dimensions (mm)\u003c\/td\u003e\n\u003ctd\u003ePB1 = 80.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP tolerance\u003c\/td\u003e\n\u003ctd\u003e+0.1 \/ 0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eComplete dimension lines and mounting views: see the linked PDF catalog.\u003c\/p\u003e\n\u003ch3\u003eMounting and Rod-End Accessories\u003c\/h3\u003e\n\u003cp\u003eSelect for load direction and motion; confirm supplied parts and quantities, since compatibility does not imply inclusion. TC requires TCM1 and ordering with the cylinder; neither mounting position may be changed arbitrarily.\u003c\/p\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003ePart \/ assembly code\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApplication and reference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC200LB\u003c\/td\u003e\n\u003ctd\u003eFoot mount; Ductile cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC200FA\u003c\/td\u003e\n\u003ctd\u003eFront flange; Ductile cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC200CA\u003c\/td\u003e\n\u003ctd\u003eRear single clevis; Ductile cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC200CB\u003c\/td\u003e\n\u003ctd\u003eRear double clevis; Ductile cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC200TC\u003c\/td\u003e\n\u003ctd\u003eTrunnion mount; Ductile cast iron; cylinder assembly option only, not separately orderable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC200FA\u003c\/td\u003e\n\u003ctd\u003eRear flange; Ductile cast iron; same flange part as FA, mounted at the rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC160TCM1\u003c\/td\u003e\n\u003ctd\u003eTrunnion support; Ductile cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-M36X200I\u003c\/td\u003e\n\u003ctd\u003eI-type rod-end joint; Carbon steel; 2176 g catalog reference. Drawing dimensions: NC = 35; ND = 144; NE = 181; NF = 65; NG = 55; NH = M36×2.0; NM = 35.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-M36X200Y\u003c\/td\u003e\n\u003ctd\u003eY-type rod-end joint; Carbon steel; 3083.8 g catalog reference. Drawing dimensions: NA = 70; NC = 35; ND = 144; NP = 73; NQ = 179; NM = 35; NH = M36×2.0; PA = 80.2; PB = 70.8.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-M36X200F\u003c\/td\u003e\n\u003ctd\u003eFloating joint; 4126 g catalog reference. Drawing dimensions: MA = 194.5; MB = 60; MC = 20.5; MD = 77.5; ME = 84; MF = 54; MG = 18; MH = 36; MI\/MJ = M36×2.0; MK = 5°.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-M36X200U\u003c\/td\u003e\n\u003ctd\u003eSpherical rod-end joint; Carbon steel; 1664 g catalog reference. Drawing dimensions: PA = 27.5; PB = 80; PC = 35; PD = 56; PE = 125; PF = 165; PG = M36×2.0; PH = 15°; PI = 57.5; PJ = 50; PK = 43.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eRod-end thread: M36×2.0. Dimensions: mm except threads\/angles. MK is floating-joint angular compensation; PH is the spherical-joint angle. Material categories do not specify every part or finish. Count only supplied-part masses.\u003c\/p\u003e\n\u003cp\u003eConfirm genuine SC200 service codes, seal material and production revision for seal kits, wear rings, guide bushings, nuts and covers. Drawing numbers and bore size are not orderable service codes. Replacement magnets apply only to magnetic cylinders.\u003c\/p\u003e\n\u003ch3\u003eForce and System Selection\u003c\/h3\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eParameter\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEffective piston areas\u003c\/td\u003e\n\u003ctd\u003eExtension 31416 mm²; retraction 30159 mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTheoretical force at 0.5 MPa\u003c\/td\u003e\n\u003ctd\u003eExtension 15708 N; retraction 15079.5 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForce calculation\u003c\/td\u003e\n\u003ctd\u003eForce (N) = effective area (mm²) × pressure (MPa), before friction and dynamic losses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad-ratio guidance\u003c\/td\u003e\n\u003ctd\u003eUp to 0.7 at static\/low speed and 0.5 at 50–500 mm\/s; stay within this cylinder’s 30–500 mm\/s range. Not a guaranteed payload or structural safety factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem selection\u003c\/td\u003e\n\u003ctd\u003eNo bore-specific speed\/valve\/tube sizing row is supplied here; size the actual system without extrapolating a smaller cylinder.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eTheoretical force, not safe payload. Account for losses, load factor and stability. The 0.1 MPa reference-table point is below the operating-pressure minimum.\u003c\/p\u003e\n\u003cp\u003eReference speeds depend on load, pressure, valve flow, tube length, fittings, cushion adjustment and exhaust backpressure. Flow area is a circuit-sizing reference, not piston area or a guaranteed achieved speed. Long strokes require stability, buckling, guidance and installation checks.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Maintenance\u003c\/h3\u003e\n\u003cp\u003eQualified staff must select\/install\/service the system. Guard motion; secure cylinders, loads and attachments. Before service, isolate air\/electricity, vent pressure and secure motion. Design safe air\/power-loss, emergency-stop and restart responses against unexpected extension or dropped loads.\u003c\/p\u003e\n\u003cp\u003eCheck protection from corrosive gas, chemicals, solvents, salt, water\/steam, explosive atmospheres, vibration, radiant heat and sun. Protect sliding surfaces from damage, dust, humidity, splashes, oil\/coolant. Prevent condensate freezing. Special seals do not extend this rating; external magnetic fields may disturb cylinders\/sensors.\u003c\/p\u003e\n\u003cp\u003eUse clean, dry, purified air, not raw compressor discharge. Remove water, particles, oxidized oil, tar\/carbon; filter to 40 µm or finer. Confirm suitability for other fluids\/synthetic-oil contaminants. Excessively dry air may shorten life unless designed for it.\u003c\/p\u003e\n\u003cp\u003eFactory lubrication normally needs no added oil. Once introduced, continue additive-free ISO-VG32 turbine oil; incompatible oil may swell seals. Guide: ≤25 mg\/m³ oil mist, 0.5–5 drops\/1000 L. Size the lubricator for flow; avoid excess oil.\u003c\/p\u003e\n\u003cp\u003eBlow pipes clean; start sealing tape 1.5–2 threads back to keep fragments out. Use suitable flame-resistant\/metal tube near hot spatter. Check each tube’s pressure, temperature, OD\/ID and bend radius; generic nylon\/PU advice cannot override its rating.\u003c\/p\u003e\n\u003cp\u003ePT3\/4 piping torque: 28–30 N·m with the specified mating connection; not a G\/NPT installation or sensor-adjustment torque.\u003c\/p\u003e\n\u003cp\u003eUse speed controls at both ports; start closed\/open slowly. Meter-out commonly stabilizes motion\/reduces startup runout. Adjust cushioning gradually to load\/speed, avoiding impact, rebound or forcing the screw. High mass\/speed may need engineered deceleration or an external absorber.\u003c\/p\u003e\n\u003cp\u003eCompressibility\/leakage prevent assuming precise prolonged mid-stroke stopping with a closed-center valve or precise cylinder synchronization. Match bore\/stroke\/cushion\/mounts\/sensors to load, pressure and travel; allow installation\/adjustment margin, favor suitable standard strokes and check air consumption.\u003c\/p\u003e\n\u003cp\u003eAlign rod\/load motion; independently guide side load, bending and torque—rod-end joints do not replace guides. Check long-rod buckling\/sag\/vibration; add suitable intermediate\/front-cover support and limit unsupported lever arms. Swinging links need CA\/CB\/TC pivots, not forced rigid LB mounts. Support height increases fastener\/bracket torque; orient flanges for push\/pull loads.\u003c\/p\u003e\n\u003cp\u003eDuring long storage, operate periodically and prevent corrosion, following air-quality\/lubrication requirements.\u003c\/p\u003e\n\u003ch3\u003eInternal Components\u003c\/h3\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eDrawing item\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBasic material reference\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 — Rod-end nut\u003c\/td\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 — Piston rod\u003c\/td\u003e\n\u003ctd\u003eS45C hard-chrome-plated ground rod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 — Front-cover O-ring\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 — Guide bushing\u003c\/td\u003e\n\u003ctd\u003eWear-resistant material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 — Front cover\u003c\/td\u003e\n\u003ctd\u003eAluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 — Cushion O-ring\u003c\/td\u003e\n\u003ctd\u003eTPU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7 — O-type seal ring\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8 — Cylinder barrel\u003c\/td\u003e\n\u003ctd\u003eAluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9 — Piston\u003c\/td\u003e\n\u003ctd\u003eAluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 — Piston-rod O-ring\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11 — Piston O-ring\u003c\/td\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 — Magnet\u003c\/td\u003e\n\u003ctd\u003ePlastic magnet for this magnetic configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e13 — Wear ring\u003c\/td\u003e\n\u003ctd\u003eWear-resistant material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14 — Hex-socket screw\u003c\/td\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 — Rear cover\u003c\/td\u003e\n\u003ctd\u003eAluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16 — Tie rod\u003c\/td\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17 — Tie-rod nut\u003c\/td\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eBasic SC200 drawing and material reference; these item numbers are not service ordering numbers. The basic material table is not automatically a special-seal bill of materials.\u003c\/p\u003e\n\u003ch3\u003eSeries Ordering Options\u003c\/h3\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eParameter\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated series\u003c\/td\u003e\n\u003ctd\u003eSC: single rod; SCD: double rod; SCJ: double rod with adjustable stroke. This product is SC.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnet\u003c\/td\u003e\n\u003ctd\u003eNo suffix: without magnet; S: magnetic piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal material\u003c\/td\u003e\n\u003ctd\u003eNo suffix: NBR; H: Fluororubber. The selected product is the blank-code NBR version.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBasic, LB, FA, FB, CA, CB, TC; matching TCM1 support is specified in the accessory table.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort options\u003c\/td\u003e\n\u003ctd\u003eNo suffix: PT; G: G thread; T: NPT.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard strokes\u003c\/td\u003e\n\u003ctd\u003e25, 50, 75, 80, 100, 125, 150, 160, 175, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCatalog stroke limits\u003c\/td\u003e\n\u003ctd\u003eMaximum stroke 1500 mm; allowable stroke 2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eOther special strokes require company confirmation. No numerical non-standard threshold is printed on this large-bore page.\u003c\/p\u003e\n\u003ch3\u003eMagnetic Sensors and Connection Leads\u003c\/h3\u003e\n\u003cp\u003eThis S cylinder accepts G-profile DMSG, CMSG and miniature EMSG sensors using the matching F-SC160SH tie-rod holder. Sensors, holders and mating leads are separately ordered; select the output and load circuit. The following permitted codes do not guarantee inventory or included supply.\u003c\/p\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eSensor \/ separate accessory\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eComplete ordering choices\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDMSG two-wire\u003c\/td\u003e\n\u003ctd\u003estandard: DMSG-020,DMSG-030,DMSG-050,DMSG-100,DMSG-M08,DMSG-M08010,DMSG-M08020,DMSG-M08030,DMSG-M12,DMSG-M12010,DMSG-M12020,DMSG-M12030; W: DMSG-020-W,DMSG-030-W,DMSG-050-W,DMSG-100-W; A05: A05-DMSG-020,A05-DMSG-030,A05-DMSG-050,A05-DMSG-100; A06: A06-DMSG-020,A06-DMSG-030,A06-DMSG-050,A06-DMSG-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDMSG NPN three-wire\u003c\/td\u003e\n\u003ctd\u003estandard: DMSG-N020,DMSG-N030,DMSG-N050,DMSG-N100,DMSG-NM08,DMSG-NM08010,DMSG-NM08020,DMSG-NM08030,DMSG-NM12,DMSG-NM12010,DMSG-NM12020,DMSG-NM12030; W: DMSG-N020-W,DMSG-N030-W,DMSG-N050-W,DMSG-N100-W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDMSG PNP three-wire\u003c\/td\u003e\n\u003ctd\u003estandard: DMSG-P020,DMSG-P030,DMSG-P050,DMSG-P100,DMSG-PM08,DMSG-PM08010,DMSG-PM08020,DMSG-PM08030,DMSG-PM12,DMSG-PM12010,DMSG-PM12020,DMSG-PM12030; W: DMSG-P020-W,DMSG-P030-W,DMSG-P050-W,DMSG-P100-W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEMSG two-wire\u003c\/td\u003e\n\u003ctd\u003estandard: EMSG-020,EMSG-030,EMSG-050,EMSG-100,EMSG-M08,EMSG-M08010,EMSG-M08020,EMSG-M08030,EMSG-M12,EMSG-M12010,EMSG-M12020,EMSG-M12030; W: EMSG-020-W,EMSG-030-W,EMSG-050-W,EMSG-100-W; A05: A05-EMSG-020,A05-EMSG-030,A05-EMSG-050,A05-EMSG-100; A06: A06-EMSG-020,A06-EMSG-030,A06-EMSG-050,A06-EMSG-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMSG two-wire\u003c\/td\u003e\n\u003ctd\u003estandard: CMSG-020,CMSG-030,CMSG-050,CMSG-100,CMSG-M08,CMSG-M08010,CMSG-M08020,CMSG-M08030,CMSG-M12,CMSG-M12010,CMSG-M12020,CMSG-M12030; H: CMSG-020-H,CMSG-030-H,CMSG-050-H,CMSG-100-H,CMSG-M08-H,CMSG-M08010-H,CMSG-M08020-H,CMSG-M08030-H,CMSG-M12-H,CMSG-M12010-H,CMSG-M12020-H,CMSG-M12030-H; A05: A05-CMSG-020,A05-CMSG-030,A05-CMSG-050,A05-CMSG-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-SC160SH\u003c\/td\u003e\n\u003ctd\u003eSC200 tie-rod sensor holder; one per selected sensor unless the actual kit specifies otherwise. Sensor count is not determined by S.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM8 female lead, 2 wires\u003c\/td\u003e\n\u003ctd\u003e2 m: F-ECM08B020; 3 m: F-ECM08B030; 5 m: F-ECM08B050; 10 m: F-ECM08B100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM8 female lead, 3 wires\u003c\/td\u003e\n\u003ctd\u003e2 m: F-ECM08C020; 3 m: F-ECM08C030; 5 m: F-ECM08C050; 10 m: F-ECM08C100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM12 female lead, 2 wires\u003c\/td\u003e\n\u003ctd\u003e2 m: F-ECM12B020; 3 m: F-ECM12B030; 5 m: F-ECM12B050; 10 m: F-ECM12B100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM12 female lead, 3 wires\u003c\/td\u003e\n\u003ctd\u003e2 m: F-ECM12C020; 3 m: F-ECM12C030; 5 m: F-ECM12C050; 10 m: F-ECM12C100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eElectrical selection\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eLimits and conditions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDMSG\/EMSG two-wire\u003c\/td\u003e\n\u003ctd\u003e10–28 V DC; load 2.5–100 mA; capacity ≤2.8 W; internal current ≤3 mA; residual voltage ≤3.5 V; leakage ≤0.06 mA; switching ≤1000 Hz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDMSG NPN\/PNP three-wire\u003c\/td\u003e\n\u003ctd\u003e5–30 V DC; switching ≤30 V, ≤200 mA, ≤6 W; internal current ≤5 mA; residual voltage ≤0.7 V; leakage ≤0.01 mA; switching ≤1000 Hz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMSG reed two-wire\u003c\/td\u003e\n\u003ctd\u003e5–240 V AC\/DC; ≤100 mA, ≤10 W, ≤200 Hz. No internal\/leakage current or protection circuit. Standard residual voltage ≤2.5 V at DC 100 mA; H has no residual voltage or indicator.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor environment\u003c\/td\u003e\n\u003ctd\u003eAll listed sensors: 50 G impact reference. DMSG\/EMSG have reverse-polarity and transient protection; EMSG also has overheat protection. Standard temperatures −10–70 °C; CMSG-H −10–125 °C. The SC200 NBR cylinder remains −20–70 °C, so the ordinary sensor-equipped system is limited to −10–70 °C or narrower.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eDirect-lead 020\/030\/050\/100 means 2\/3\/5\/10 m. M08\/M12 are M8\/M12 male quick connectors with 0.5 m lead; M08010\/020\/030 and M12010\/020\/030 have 1\/2\/3 m leads. These lengths are unrelated to cylinder stroke. Two-wire is the blank output; N and P are NPN and PNP.\u003c\/p\u003e\n\u003cp\u003eStandard\/A05 DMSG and EMSG are IP64; direct W and A06 are IP68. Quick connectors do not have W. All CMSG versions are IP64. A05 is high-flex robot cable; A06 is oil-resistant high-flex. A05\/A06 direct leads have a 19 mm minimum bend radius. Industry versions are two-wire and direct-lead only; CMSG A05 has no H, and no A06 CMSG choice is listed. These are not explosion-proof or permanent-immersion approvals.\u003c\/p\u003e\n\u003cp\u003eFor a quick connector, match M8\/M12 and B two-wire\/C three-wire female leads to the sensor. Two-wire pins: 1 brown (+), 4 blue (−), 3 unused. Three-wire pins: 1 brown (+), 3 blue (−), 4 black output. Direct-lead sensors need no quick mating cable. Cable temperature, IP and voltage ratings are not independently given here; do not transfer sensor-body ratings to the complete cable assembly or raise the cylinder temperature because a CMSG-H is selected.\u003c\/p\u003e\n\u003cp\u003eSeat the holder on the tie rod against the barrel, place the sensor near the middle of its switching range and verify clearance and signal. Sensor fastening torque is recommended at 0.15–0.20 N·m, maximum 0.25 N·m; it is not cylinder-bolt or air-port torque.\u003c\/p\u003e\n\u003cp\u003eConnect the load before applying power and follow the selected two-wire\/NPN\/PNP diagram. Two-wire sensors require a series load, not a direct connection across the supply. Maintain insulation and separate signal from power\/high-voltage cables. Avoid pulling or repeated flexing, impacts, strong magnetic fields, iron chips, current surges and abrupt temperature changes. Protect against water, oil and welding spatter; inspect mounting, cables and switching periodically.\u003c\/p\u003e\n\u003ch3\u003eConnection and Upstream Options\u003c\/h3\u003e\n\u003cdiv class=\"scw\" style=\"overflow-x:auto;max-width:100%\"\u003e\u003ctable class=\"sct\" cellpadding=\"6\" style=\"margin:0!important;width:100%;table-layout:fixed;overflow-wrap:anywhere\"\u003e\n\u003cthead\u003e\u003ctr data-head\u003e\n\u003cth scope=\"col\" data-first\u003eComplete ordering code\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSeparately installed upstream filter\/regulator\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGAFR50020ST\u003c\/td\u003e\n\u003ctd\u003etwo female NPT3\/4 ports; PC bowl, 108 cc; round gauge in psi\/bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGAFR600C20ST\u003c\/td\u003e\n\u003ctd\u003etwo female NPT3\/4 ports; Metal bowl, 205 cc; round gauge in psi\/bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eSelect separate male NPT3\/4 fittings for both cylinder working ports, with tube OD\/ID, flow capacity, seal and clearance matched to the installation. PT, G and NPT are not interchangeable. The M36×2.0 rod thread is not an air port.\u003c\/p\u003e\n\u003cp\u003eThe filter\/regulators below are separate upstream options, not cylinder-port fittings or an included kit. Connect their IN\/OUT ports with correctly matched male fittings. Do not fit a smaller male connector directly into a larger port; any adapter must match both thread sizes, standards and genders without restricting required flow.\u003c\/p\u003e\n\u003cp\u003eThese complete ordering examples use compressed air, a 40 µm element, differential-pressure\/manual drain, included bracket and round gauge, standard regulation and no reverse-flow valve. The 500 series uses a PC bowl; 600C uses a metal bowl. Other configurations require their own ordering codes.\u003c\/p\u003e\n\u003cp\u003eMaximum inlet pressure 1 MPa; proof pressure 1.5 MPa is not operating pressure. Adjustment range 0.15–0.9 MPa; temperature −5–70 °C, non-freezing. Observe flow\/pressure loss, IN\/OUT direction, condensate drainage, bowl environment and every downstream component limit. These are not vacuum regulators.\u003c\/p\u003e\n\u003cp\u003eSize the valve, tubing and both endpoint connections for the required load, stroke, speed and pressure loss. Do not use a smaller-bore selection table as a guaranteed large-cylinder speed rating. Meter-out controls must match the actual port and circuit; valve-exhaust silencers must match that valve’s exhaust ports. Do not place silencers or plugs on either active cylinder port.\u003c\/p\u003e\n\u003cp\u003eTube OD and ID must match the specified fittings; inch tubing is not interchangeable with nominal metric tubing. A 16 × 11 mm tube requires separately specified 16 mm endpoint fittings and controls. Select the complete connection path before ordering; the upstream unit alone does not specify a full pneumatic circuit.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Airtac-2","offers":[{"title":"Default Title","offer_id":53159525482799,"sku":"SC200X449SCBT","price":1561.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/2336\/1327\/files\/swy_sho43p_image-sc150_b6856326-9a4b-40ca-a99c-303f5257bad9.webp?v=1769386108","url":"https:\/\/www.airtacs.com\/products\/airtac-sc-series-standard-double-acting-cylinder-sc200x449scbt","provider":"Airtac","version":"1.0","type":"link"}