Products
-
Airtac 2JW320-32: Angle Seat Valve - 2JWY32032Q63G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø32mm,Nozzle caliber: 1 1/4",Actuator bore: ø63mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$198.00
-
Airtac 2JW320-32: Angle Seat Valve - 2JWY32032Q63T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø32mm,Nozzle caliber: 1 1/4",Actuator bore: ø63mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$198.00
-
Airtac 2JW320-32: Angle Seat Valve - 2JWY32032Q80G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø32mm,Nozzle caliber: 1 1/4",Actuator bore: ø80mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$207.40
-
Airtac 2JW320-32: Angle Seat Valve - 2JWY32032Q80T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø32mm,Nozzle caliber: 1 1/4",Actuator bore: ø80mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$207.40
-
Airtac 2JW320-32: Angle seat valve(2/2 way) - 2JW32032Q63G
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ25mm orifice,1" port,Φ63mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$299.57
-
Airtac 2JW320-32: Angle seat valve(2/2 way) - 2JW32032Q63T
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ25mm orifice,1" port,Φ63mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$299.57
-
Airtac 2JW320-32: Angle seat valve(2/2 way) - 2JW32032Q80G
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ25mm orifice,1" port,Φ80mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$374.57
-
Airtac 2JW320-32: Angle seat valve(2/2 way) - 2JW32032Q80T
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ25mm orifice,1" port,Φ80mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$374.57
-
Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q40G
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q40T
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q50G
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q50T
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q40G
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q40T
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q50G
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q50T
Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q40G
Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$165.00
-
Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q40T
Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$171.43
-
Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q50G
Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$171.43
-
Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q50T
Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$165.00
-
Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q50G
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$272.14
-
Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q50T
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$272.14
-
Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q63G
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$315.00
-
Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q63T
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$315.00
-
Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q63G
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$299.57
-
Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q63T
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$299.57
-
Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q80G
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ80mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$374.57
-
Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q80T
Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ80mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$374.57
-
Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q40G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q40T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q50G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q50T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q40G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q40T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q50G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q50T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JWY200-20: Angle seat valve(2/2 way) - 2JWY20020Q40G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ20mm orifice,3/4" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$203.57
-
Airtac 2JWY200-20: Angle seat valve(2/2 way) - 2JWY20020Q40T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ20mm orifice,3/4" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$203.57
-
Airtac 2JWY200-20: Angle seat valve(2/2 way) - 2JWY20020Q50G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ20mm orifice,3/4" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$216.79
-
Airtac 2JWY200-20: Angle seat valve(2/2 way) - 2JWY20020Q50T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ20mm orifice,3/4" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$216.79
-
Airtac 2JWY250-25: Angle seat valve(2/2 way) - 2JWY25025Q50G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ25mm orifice,1" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$321.00
-
Airtac 2JWY250-25: Angle seat valve(2/2 way) - 2JWY25025Q50T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ25mm orifice,1" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$321.00
-
Airtac 2JWY250-25: Angle seat valve(2/2 way) - 2JWY25025Q63G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ25mm orifice,1" port,Φ63mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$396.00
-
Airtac 2JWY250-25: Angle seat valve(2/2 way) - 2JWY25025Q63T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ25mm orifice,1" port,Φ63mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$396.00
-
Airtac 2JWY320-32: Angle seat valve(2/2 way) - 2JWY32032Q63G
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ32mm orifice,1" port,Φ63mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$299.57
-
Airtac 2JWY320-32: Angle seat valve(2/2 way) - 2JWY32032Q63T
Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ32mm orifice,1" port,Φ63mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$374.57
-
Airtac 2KL030-06 : Fluid control valve(2/2 way) - 2KL03006A
2/2 way direct-acting and normally opened,standard,030 series,1/8" port,AC220V voltage,terminal,PT thread Product feature:1.Direct acting and normally opened type 2/2 way solenoid valve. Its high sensibility allows it to change direction quickly;2.It has wide pressure range, including standard high pressure (H) to choose from;3.It is compact, small size and lightweight. It is easy to install and dismantle.4.The valve body is made of SUS304 . Its coil has a Heat resistance classification of Class H. The standard seal material is PTFE(Teflon) which is suitable for a variety of working medium such as water with high temperature and vapour.5.The protection class of the coil is IP65 and there is a choice for grommet or terminal electrical entry .
$70.29
-
Airtac 2KL030-06 : Fluid control valve(2/2 way) - 2KL03006AG
2/2 way direct-acting and normally opened,standard,030 series,1/8" port,AC220V voltage,terminal,G thread Product feature:1.Direct acting and normally opened type 2/2 way solenoid valve. Its high sensibility allows it to change direction quickly;2.It has wide pressure range, including standard high pressure (H) to choose from;3.It is compact, small size and lightweight. It is easy to install and dismantle.4.The valve body is made of SUS304 . Its coil has a Heat resistance classification of Class H. The standard seal material is PTFE(Teflon) which is suitable for a variety of working medium such as water with high temperature and vapour.5.The protection class of the coil is IP65 and there is a choice for grommet or terminal electrical entry .
$70.29
You have seen 768 out of 25001 products