Products
-
Airtac 2JSY200-20: Angle seat valve(2/2 way) - 2JSY20020Q40G
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ20mm orifice,3/4" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$203.57
-
Airtac 2JSY200-20: Angle seat valve(2/2 way) - 2JSY20020Q40T
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ20mm orifice,3/4" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$203.57
-
Airtac 2JSY200-20: Angle seat valve(2/2 way) - 2JSY20020Q50G
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ20mm orifice,3/4" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$216.79
-
Airtac 2JSY200-20: Angle seat valve(2/2 way) - 2JSY20020Q50T
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ20mm orifice,3/4" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$216.79
-
Airtac 2JSY250-25: Angle seat valve(2/2 way) - 2JSY25025Q50G
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ25mm orifice,1" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$272.14
-
Airtac 2JSY250-25: Angle seat valve(2/2 way) - 2JSY25025Q50T
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ25mm orifice,1" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$272.14
-
Airtac 2JSY250-25: Angle seat valve(2/2 way) - 2JSY25025Q63G
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ25mm orifice,1" port,Φ63mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$315.00
-
Airtac 2JSY250-25: Angle seat valve(2/2 way) - 2JSY25025Q63T
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ25mm orifice,1" port,Φ63mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$315.00
-
Airtac 2JSY320-32: Angle seat valve(2/2 way) - 2JSY32032Q63G
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ32mm orifice,1" port,Φ63mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$299.57
-
Airtac 2JSY320-32: Angle seat valve(2/2 way) - 2JSY32032Q63T
Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ32mm orifice,1" port,Φ63mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$374.57
-
Airtac 2JW150-10: Angle Seat Valve - 2JW15010Q40G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø40mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-10: Angle Seat Valve - 2JW15010Q40T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø40mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-10: Angle Seat Valve - 2JW15010Q50G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø50mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-10: Angle Seat Valve - 2JW15010Q50T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø50mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-10: Angle Seat Valve - 2JWK15010Q40G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø40mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-10: Angle Seat Valve - 2JWK15010Q40T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø40mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-10: Angle Seat Valve - 2JWK15010Q50G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø50mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$105.80
-
Airtac 2JW150-10: Angle Seat Valve - 2JWK15010Q50T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø50mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$105.80
-
Airtac 2JW150-10: Angle Seat Valve - 2JWY15010Q40G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø40mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-10: Angle Seat Valve - 2JWY15010Q40T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø40mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-10: Angle Seat Valve - 2JWY15010Q50G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø50mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-10: Angle Seat Valve - 2JWY15010Q50T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 3/8",Actuator bore: ø50mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-10: Angle seat valve(2/2 way) - 2JW15010Q40G
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,3/8" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JW150-10: Angle seat valve(2/2 way) - 2JW15010Q40T
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,3/8" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JW150-10: Angle seat valve(2/2 way) - 2JW15010Q50G
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,3/8" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JW150-10: Angle seat valve(2/2 way) - 2JW15010Q50T
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,3/8" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JW150-15: Angle Seat Valve - 2JW15015Q40G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø40mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-15: Angle Seat Valve - 2JW15015Q40T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø40mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-15: Angle Seat Valve - 2JW15015Q50G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø50mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-15: Angle Seat Valve - 2JW15015Q50T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø50mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-15: Angle Seat Valve - 2JWK15015Q40G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø40mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-15: Angle Seat Valve - 2JWK15015Q40T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø40mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-15: Angle Seat Valve - 2JWK15015Q50G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø50mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$105.80
-
Airtac 2JW150-15: Angle Seat Valve - 2JWK15015Q50T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally open type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø50mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$105.80
-
Airtac 2JW150-15: Angle Seat Valve - 2JWY15015Q40G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø40mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-15: Angle Seat Valve - 2JWY15015Q40T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø40mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$93.40
-
Airtac 2JW150-15: Angle Seat Valve - 2JWY15015Q50G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø50mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-15: Angle Seat Valve - 2JWY15015Q50T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed water hammer type,Nominal diameter: ø15mm,Nozzle caliber: 1/2",Actuator bore: ø50mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$97.20
-
Airtac 2JW150-15: Angle seat valve(2/2 way) - 2JW15015Q40G
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,1/2" port,Φ40mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JW150-15: Angle seat valve(2/2 way) - 2JW15015Q40T
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,1/2" port,Φ40mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$135.00
-
Airtac 2JW150-15: Angle seat valve(2/2 way) - 2JW15015Q50G
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,1/2" port,Φ50mm size,G thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JW150-15: Angle seat valve(2/2 way) - 2JW15015Q50T
Angle seat valve(2/2 way),SUS304,no water-hammer(NC),Φ15mm orifice,1/2" port,Φ50mm size,NPT thread Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.
$147.86
-
Airtac 2JW200-20: Angle Seat Valve - 2JW20020Q40G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø20mm,Nozzle caliber: 3/4",Actuator bore: ø40mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$105.80
-
Airtac 2JW200-20: Angle Seat Valve - 2JW20020Q40T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø20mm,Nozzle caliber: 3/4",Actuator bore: ø40mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$105.80
-
Airtac 2JW200-20: Angle Seat Valve - 2JW20020Q50G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø20mm,Nozzle caliber: 3/4",Actuator bore: ø50mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$109.70
-
Airtac 2JW200-20: Angle Seat Valve - 2JW20020Q50T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø20mm,Nozzle caliber: 3/4",Actuator bore: ø50mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$109.70
-
Airtac 2JW200-20: Angle Seat Valve - 2JW20020Q63G
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø20mm,Nozzle caliber: 3/4",Actuator bore: ø63mm,Tooth type: G tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$143.10
-
Airtac 2JW200-20: Angle Seat Valve - 2JW20020Q63T
Specifications: two-port two-position pneumatic angle seat valve,Body material: stainless steel SUS304,Initial state: normally closed anhydrous hammer type,Nominal diameter: ø20mm,Nozzle caliber: 3/4",Actuator bore: ø63mm,Tooth type: NPT tooth,Click to download the Airtac catalogProduct Features1.Air piloted and can be used non electric flammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories and slide bar are made of stainless steel which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve angles at 45 degrees with streamline inner chamber design. The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core is added at inlet port to prevent the entrance of impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used for NAMUR value.6.The actuator part can be rotated at 360 degrees and is easily installed.
$143.10
You have seen 672 out of 25001 products