Free shipping and tax exemption for orders over $30 (0.5kg)!

191

124 products


  • Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q50G

    Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q50G

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q50G

    Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q50G

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q40G

    Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q40G

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ40mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q40G

    Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q40G

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ40mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q50T

    Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q50T

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q50T

    Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q50T

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q40T

    Airtac 2JWY150-15: Angle seat valve(2/2 way) - 2JWY15015Q40T

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ40mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q40T

    Airtac 2JWY150-10: Angle seat valve(2/2 way) - 2JWY15010Q40T

    Angle seat valve(2/2 way),SUS304,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ40mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q50T

    Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q50T

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $158.57

  • Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q50T

    Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q50T

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $145.71

  • Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q40T

    Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q40T

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ40mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $158.57

  • Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q40T

    Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q40T

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ40mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $145.71

  • Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q50G

    Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q50G

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $158.57

  • Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q50G

    Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q50G

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $145.71

  • Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q40G

    Airtac 2JSY150-15: Angle seat valve(2/2 way) - 2JSY15015Q40G

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G1/2" port,Φ40mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $158.57

  • Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q40G

    Airtac 2JSY150-10: Angle seat valve(2/2 way) - 2JSY15010Q40G

    Angle seat valve(2/2 way),SUS316L,water-hammer(NC),Φ15mm orifice,G3/8" port,Φ40mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $145.71

  • Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q80T

    Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q80T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ80mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $374.57

  • Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q63T

    Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q63T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $299.57

  • Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q80G

    Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q80G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ80mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $374.57

  • Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q63G

    Airtac 2JWK320-32: Angle seat valve(2/2 way) - 2JWK32032Q63G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $299.57

  • Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q80T

    Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q80T

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ80mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $396.00

  • Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q63T

    Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q63T

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ63mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $321.00

  • Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q80G

    Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q80G

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ80mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $396.00

  • Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q63G

    Airtac 2JSK320-32: Angle seat valve(2/2 way) - 2JSK32032Q63G

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ63mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $321.00

  • Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q63T

    Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q63T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $315.00

  • Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q50T

    Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q50T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $272.14

  • Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q63G

    Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q63G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ63mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $315.00

  • Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q50G

    Airtac 2JWK250-25: Angle seat valve(2/2 way) - 2JWK25025Q50G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ25mm orifice,1" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $272.14

  • Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q63T

    Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q63T

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ63mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $336.43

  • Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q50T

    Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q50T

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $293.57

  • Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q63G

    Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q63G

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ63mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $336.43

  • Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q50G

    Airtac 2JSK250-25: Angle seat valve(2/2 way) - 2JSK25025Q50G

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ25mm orifice,1" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $293.57

  • Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q63T

    Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q63T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ63mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $171.43

  • Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q50T

    Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q50T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $165.00

  • Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q40T

    Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q40T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ40mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $171.43

  • Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q63G

    Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q63G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ63mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $165.00

  • Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q50G

    Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q50G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $171.43

  • Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q40G

    Airtac 2JWK200-20: Angle seat valve(2/2 way) - 2JWK20020Q40G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ20mm orifice,3/4" port,Φ40mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $165.00

  • Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q50T

    Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q50T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q40T

    Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q40T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ40mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q50G

    Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q50G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q40G

    Airtac 2JWK150-15: Angle seat valve(2/2 way) - 2JWK15015Q40G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,1/2" port,Φ40mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q50T

    Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q50T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q40T

    Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q40T

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ40mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q50G

    Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q50G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ50mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $147.86

  • Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q40G

    Airtac 2JWK150-10: Angle seat valve(2/2 way) - 2JWK15010Q40G

    Angle seat valve(2/2 way),SUS304,normal opened,Φ15mm orifice,3/8" port,Φ40mm size,G thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $135.00

  • Airtac 2JSK200-20: Angle seat valve(2/2 way) - 2JSK20020Q63T

    Airtac 2JSK200-20: Angle seat valve(2/2 way) - 2JSK20020Q63T

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ20mm orifice,3/4" port,Φ63mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $182.14

  • Airtac 2JSK200-20: Angle seat valve(2/2 way) - 2JSK20020Q50T

    Airtac 2JSK200-20: Angle seat valve(2/2 way) - 2JSK20020Q50T

    Angle seat valve(2/2 way),SUS316L,normal opened,Φ20mm orifice,3/4" port,Φ50mm size,NPT thread   Product Features:1.Air piloted and can be used non electric, inflammable and explosive environment. The start-up pressure is low; and the high pressure could be controlled by the low pressure.2.The accessories such as the noumenon and slide barare made of stainless steel, which are of excellent rustproof quality. The seals are made of Teflon and can be applied extensively in areas with high temperature and strong corrosive liquids.3.The structure of valve is angles at 45° degrees with streamline inner chamber design . The reduced tunnel resistance allows liquid to run more smoothly thus achieving high flow. Filtration core are added at Inlet port to prevent the entrance of Impurities and extend life span of the seals.4.Actuator is fitted with visual position indicator. This allows for visual checking and adjustment of flowrate.5.Control point is made of metal insert. Mounting plate can be used to for NAMURvalue.6.The actuator part can be rotated at 360° degrees and is easily installed.

    $175.71


You have seen 48 out of 124 products

Footer image

© 2024 Airtac,

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account