AC，BC

The "Invisible Guardian": Why AirTAC AC & BC Series are Your Machine's First Line of Defense

In a high-performance automation system, untreated compressed air is not energy—it's an abrasive, corrosive "sludge." The #1 cause of premature component failure isn't usage, but the invisible assassins lurking in your air lines.

Core Systematic Defense

Eliminates Water (Corrosion)
Removes Particulates (Abrasion)
Intercepts Compressor Oil (Sludge)
3-Stage Integrated Defense (F-R-L)
Precision Balanced Regulation
Micro-Mist Protection

1. The "Three Assassins" Destroying Your System

Assassin 1: Water (H2O)

Causes internal rust in valve bodies and washes away factory grease, leading to dry friction and catastrophic seal failure.

Assassin 2: Particulates

Dust and pipe scale act as sandpaper, grinding down O-rings and clogging the tiny pilot orifices of solenoid valves.

Assassin 3: Oil Sludge

Carry-over oil from the compressor mixes with water to form a sticky "mayonnaise" that jams moving parts and ruins product finishes.

2. The F-R-L Trinity: Synergistic Engineering

The sequence of the AirTAC AC/BC series is scientifically optimized. Filter (F) -> Regulator (R) -> Lubricator (L).

Step 1: Filter (AF/BF) – Uses Cyclone Separation to spin out heavy liquids before air ever touches the micron filter element.

Step 2: Regulator (AR/BR) – Features a Push-to-Lock knob to stabilize air pressure regardless of upstream fluctuations.

Step 3: Lubricator (AL/BL) – Uses the venturi effect to atomize oil into a Micro-Mist that travels downstream to protect air tools and motors.

⚠️ The Lubrication Trap: ISO VG 32 ONLY

You must use ISO VG 32 oil. Heavier oils (like VG 46) are too thick to mist. If used, your tools will starve for lubrication even while the reservoir looks full.

3. Scalable Performance: AC vs. BC Sizing

AC Series: Compact Efficiency

Designed for tight cabinets and low-flow stations (1/8" to 1/4" ports). Features a 15CC - 25CC bowl.

BC Series: Industrial Power

Designed for heavy-duty cylinders and tools (1/4" to 1/2" ports). Features a massive 60CC - 90CC bowl to extend maintenance intervals.

Maintenance Strategy & FAQs

1. AC vs. BC: Which to pick? Scale. Use AC for compact robots/machines; use BC for mainstream high-flow assembly lines.

2. Oil-Free application? Do NOT use an FRL. Buy an FR unit (Filter-Regulator) like the BFR series to avoid contamination.

3. Drain selection? Use Semi-Auto if your machine shuts down daily; use Auto Drain for 24/7 operations to prevent overflow.

A Strategy, Not Just a Part

The AirTAC AC/BC Series is the single most important investment in your machine's longevity. By stopping the "Three Assassins" at the gate, you break the cycle of wear and failure. It is the smartest first step toward a trouble-free automation system.